45 Gallon Fast Dri Coal Tar Sealer (Contractor Grade)

Dries so fast, it is ready for traffic in as little as 30 minutes
Geotextile fortified to be tough Long lasting protection Slip resistant No tracking

Application:
FAST-DRI Asphalt Coal Tar Resurfacer is a contractor grade sealcoat, available in a ready-to-use, premixed form or as a two part component system. The two component system consits of a liquid that requires the addition of a precise proportion of special silica sand. The liquid can be purchased with or without this sand. Apply over water fog-spray dampened pavement with hand squeegee or brush applicators, or suitable mechanical squeegee or conventional sealer spray equipment designed to handle sand-filled material.

Spray Applications: For best performance, hose length should not exceed 50 ft. (from pump to spray wand) and use and 80/50 ceramic spray tip.

Coverage: 80 -100 sq. ft. per gallon per coat (2 coats recommended).

• Area of Concern Fass-Dri Asphalt
• Resurfacer RP 355(e)
• Coal Tar Emulsions
• Drying Time: As little as 30 mins. | 18 to 36 hrs.
• Solids By Weight: 60%-65% 47% or less when watered down
• Taber Abrasion Test: Excellent. Six (6) times

(ordinary sealers. Fair to good.)

• Flexibility: Excellent. Three (3) times (ordinary sealers. Fair to good.)
• Tracking: NONE. Will not track or re-flow.
• Ready to Use
• 45 Gal. Drum, 590 lbs. Covers Aprox 4500 Sq Ft